Product Details
- Product: 2.25 mm Fine Fine Chair Cane
- Size listed: 2.25 mm (fine fine cane; verify chair hole size and spacing before ordering)
- Package quantity listed: 1 pound coil (coverage varies by chair size, hole count, and weaving pattern, so confirm project needs before buying)
- Material type: rattan peel cane / chair cane
- Product dimensions listed: 14 x 14 x 3 inches
- Item model number listed: UA-225-RC
- Item weight listed: 1.25 pounds
- Main use: hole-to-hole chair caning and chair seat weaving
- Also used for: wicker furniture repair, binding, reinforcing wraps, re-wrapping, and cane furniture projects
- Finish note: smooth glossy rattan surface may not take paint or stain well; natural color variation is normal
For a smaller supply option in the same cane size, compare 2.25mm fine fine chair cane 270 ft coil before choosing the right quantity.
What This Chair Cane Is Best For
This cane is best for traditional hole-to-hole chair caning, where individual cane strands are woven through drilled holes around the chair seat or back frame. It is not the same as pre-woven cane webbing used for pressed cane seats. Choose this fine fine size only when the existing chair or pattern calls for a narrow 2.25 mm cane.
If you need a larger supply of the same 2.25 mm size, review 2.25mm fine fine chair cane 1000 ft coil before ordering.
For a slightly larger chair cane size, compare 2.5mm fine chair cane 270 ft coil to match your chair pattern correctly.
Choosing the Right Cane Size
Chair cane size should match the hole size and spacing on your chair frame. A cane that is too thick can be difficult to weave and may stress the frame, while cane that is too thin may not create the proper finished seat pattern. If you are unsure, compare the old cane strand or project pattern before selecting 2.25 mm fine fine cane.
If your chair requires narrow-medium cane instead of fine fine cane, compare chair caning kit narrow medium 2.75mm chair cane before starting the repair.
For chair projects that need medium cane, review chair cane medium 3mm coil as another size option.
Preparation and Weaving Guidance
Before weaving, soak the chair cane in water for about 15 minutes or as directed so it becomes flexible and easier to manage. Keep the cane damp while weaving, but avoid soaking it for too long because over-soaked cane can become weak or harder to control.
Work slowly through the chair holes and avoid forcing dry cane around corners or tight bends. Keep even tension as you weave so the seat pattern stays firm and balanced.
Use With the Right Chair Type
This cane is meant for over-the-rail or hole-to-hole caning projects. If your chair has a groove around the seat instead of drilled holes, it may require pressed cane webbing and spline instead.
Check the old chair seat before ordering. Hole-to-hole caning, pressed cane webbing, binder cane, flat reed, and reed spline are different materials and should not be used interchangeably unless the project instructions allow it.
Care and Storage
Store unused cane in a dry indoor space away from moisture, direct heat, and heavy pressure. Keep the coil loosely tied so the cane does not tangle or kink.
After dampening, let unused strands dry fully before storage. Natural rattan cane may vary slightly in color, thickness, and surface texture, so check the strands before starting visible repair areas.
