Product Details
- Product type: Pressed cane webbing repair kit
- Weave style: Radio weave cane mesh
- Cane mesh size: 18 inches x 18 inches
- Spline included: 3 listed spline sizes for different groove widths
- Listed spline fit: #7 for 1/8-inch groove, #8 for 3/16-inch groove, and #9 for 1/4-inch groove
- Wedges included: Wooden wedges
- Instructions included: Yes
- Glue included: Not listed as included
- Listed product dimensions: 20 x 10 x 4 inches
- Listed item weight: 1.05 pounds
- Manufacturer: V.I. Reed & Cane, Inc.
- Best use: Pressed cane chair seats, chair backs, and small furniture panels with a routed groove
Best Uses for This Pressed Cane Webbing Kit
This kit is best for replacing worn or damaged pressed cane in furniture that already has a groove around the seat or back opening. The included spline size options help you match the groove before securing the new cane panel.
For general repair planning, read this chair caning kit guide before starting. If you need another repair option, you can also compare it with this pressed cane webbing kit.
Fit and Compatibility Notes
Before buying, check whether your chair uses pressed cane or hand caning. Pressed cane is installed as a pre-woven sheet and held in a routed groove with spline. Hand caning uses separate cane strands woven through individual holes around the chair frame.
Measure the chair opening and groove size carefully before cutting the cane mesh. The 18 x 18 inch cane sheet should leave enough extra material around the edges for fitting, pressing, and trimming.
Before You Start
Remove the old cane and spline from the groove before installation. Clean the groove so the new cane webbing and spline can sit properly. If old glue or broken cane remains inside the groove, the new panel may not fit evenly.
If you are repairing more than one chair or need extra material, browse more cane webbing options before ordering.
Installation Notes
Soak the cane webbing briefly before fitting so it becomes easier to press into the groove. Do not force dry cane into the frame, because it may crack or create uneven tension. After the cane is placed into the groove, use the correct spline size to secure it.
Wooden wedges can help hold the cane in position during fitting. Work slowly around the frame and trim the extra cane only after the panel is properly seated.
Cane Webbing vs Hand Caning
This product is for pressed cane repair, not traditional hand caning. Pressed cane uses a pre-woven sheet, while hand caning uses individual cane strands. If your chair has drilled holes around the seat, this kit is not the correct repair method.
For projects that use pre-woven sheets, this radio weave pressed cane webbing kit is a suitable option for small chair and furniture repairs.
Care and Maintenance
After installation, allow the cane to dry naturally so it can tighten into place. Keep the repaired chair indoors or in a dry protected area. Avoid heavy moisture, direct rain, and harsh cleaners because natural cane can weaken with poor storage conditions.
Dust the finished cane surface with a soft cloth and avoid overloading the repaired seat until the cane, spline, and adhesive are fully dry and secure.
