Product Details
- Product type: pre-woven cane webbing sheet
- Width: 24 inches
- Mesh style: standard size fine open 1/2-inch mesh
- Measurement note: 1/2 inch from the center of one hole to the center of the next hole
- Sold by: running foot
- Quantity guide: Qty 1 = 24 inches x 12 inches, Qty 2 = 24 inches x 24 inches, Qty 3 = 24 inches x 36 inches, and so on
- Product dimensions: 12 x 1 x 12 inches
- Shipping weight: 8 ounces
- Best for: pressed cane chair seats, chair backs, cabinet doors, basket panels, furniture repair, and decorative cane projects
- Measure and cut the material to fit before installation
- Spline, glue, wedges, and installation tools may need to be purchased separately depending on your repair
Best Uses for This 24-inch Cane Webbing
This pre-woven cane webbing is useful for projects that need a wider panel than standard narrow sheets. It can be used for pressed cane chair seats, chair backs, cabinet inserts, decorative furniture panels, and craft projects where an open cane pattern is desired.
If you are working on a smaller repair, 18″ wide cane webbing may be enough for the project. For larger work where you need more continuous material, a 24″ cane webbing roll may be easier to use.
Measuring Before You Order
Measure both the width and length of the area you want to cover. Add extra material around the edges so the cane can be fitted, trimmed, and secured properly.
Because this item is sold by the running foot, choose the quantity based on the length you need. For example, quantity 1 gives a 12-inch long piece, quantity 2 gives 24 inches, and quantity 3 gives 36 inches.
Installation Notes
Before installation, the cane webbing may need to be lightly softened with water so it becomes easier to fit into a groove or frame. Do not oversoak it, and allow the material to dry fully after installation so it can tighten into place.
This type of cane webbing is commonly used for groove-style pressed cane projects. If your chair has individual drilled holes around the frame, strand cane may be the better choice instead of sheet cane.
For a project that needs mesh, spline, wedges, and instructions together, a pressed cane webbing kit may be a better option.
Care and Storage
Store unused cane webbing in a dry indoor area. Keep it loosely rolled or flat, and avoid crushing the woven pattern before use.
After installation, clean the finished cane surface gently with a dry or slightly damp cloth. Avoid harsh cleaners, heavy soaking, and constant outdoor moisture unless the finished furniture has been properly protected.
Buyer Reference
Before purchasing, compare the 24-inch width, 1/2-inch mesh, running-foot quantity, and project size to confirm this cane webbing matches your repair or furniture panel project.
