Product Details
- Product type: Pre-woven cane webbing roll
- Weave style: 1/2 inch fine open weave
- Width: 18 inches
- Length: 10 foot roll
- Material: Natural cane webbing
- Best use: Pressed cane chair seats, chair backs, cabinet panels, and furniture inserts
- Compatibility: For frames with a routed groove and spline system
- Not for: Hand-caned chairs with individual drilled holes
- Order quantity note: Quantity 1 should provide one 10-foot roll; quantity 2 should provide two 10-foot rolls, when available
- Tools, spline, glue, and installation supplies: Not confirmed as included
Best Uses for This Cane Webbing Roll
Use this cane webbing roll for chair seats, chair backs, cabinet door inserts, decorative panels, and furniture restoration projects that need a traditional open cane pattern. It is a good option when you need more material than a small per-foot piece.
For smaller repair jobs, buyers can compare this roll with 18 inch cane webbing sold per foot before choosing the best size for the project.
Compatibility and Fit
This product is intended for pressed cane furniture. Pressed cane uses a pre-woven cane sheet that fits into a groove and is secured with spline after trimming and soaking.
Do not use this roll for chairs with individual drilled holes around the frame. Those chairs usually need strand cane, such as narrow medium chair cane, instead of pre-woven cane webbing.
How to Order the Right Amount
Measure the seat, back, or panel opening before ordering. Allow extra material around all sides so the cane webbing can be soaked, pressed into the groove, trimmed, and secured properly.
If your project needs a ready repair setup, you may also compare this roll with a chair caning replacement repair kit that is designed for specific seat repair needs.
Installation Notes
Soak the cane webbing briefly before installation so it becomes flexible enough to fit into the groove. Avoid forcing dry cane into the frame, as this can cause cracking, uneven tension, or damage to the weave.
For best results, remove old spline and old cane carefully, clean the groove, test the fit, and then install the new cane webbing with the correct spline size. Browse more cane webbing supplies if you need related webbing options for other chair or furniture repair projects.
Care and Maintenance
After installation, allow the cane webbing to dry naturally and tighten into position before regular use. Keep the finished cane surface indoors or in a dry protected area.
Avoid direct rain, heavy moisture, harsh cleaners, and overloading a newly repaired cane seat. Clean gently with a soft cloth and check the spline area if the seat or panel becomes loose over time.
