Product Details
- Product: 24” Width Natural Cane Webbing 5 Feet
- Material listed: natural rattan
- Roll size listed: 24” wide x 5 feet long
- Product dimensions listed: 59 x 23.6 x 0.07 inches
- Item model number listed: TB-60-150
- Item weight listed: 16 ounces
- Weave style: woven open mesh cane
- Best for: furniture caning, chair backs, cabinet doors, ceiling panels, bed accents, room décor, and DIY rattan repair projects
- Preparation note: soak before use so the cane becomes more flexible for fitting and trimming; if the exact soaking time is not listed, test a small section first and avoid over-soaking.
- Approximate coverage: about 10 square feet before trimming
- Mesh/opening note: exact opening size and strand thickness are not listed, so compare the pattern with your existing panel before cutting
- Installation fit note: confirm whether your frame needs spline, staples, adhesive, or a retaining strip before starting
For a similar smaller sheet, compare 18 width natural rattan webbing 3 feet before choosing your roll size.
What This Cane Webbing Roll Is Best For
This 24-inch cane webbing roll is best for projects that need a wide rattan sheet instead of loose reed or individual weaving strands. It can be used for framed cabinet doors, chair backs, headboards, furniture inserts, decorative wall panels, room dividers, and craft projects. For chair seats or weight-bearing areas, confirm the frame support and installation method before using it.
If your project needs a narrower roll, compare 18 width rattan cane webbing roll 5 feet before ordering.
For traditional cane seat repair where spline and wedges are needed, a pressed cane webbing kit may be a better option than buying only the webbing roll.
Measuring and Cutting Guidance
Measure the inside opening of your frame before cutting the cane webbing. Leave extra material around each side so the sheet can be pulled into position, stapled, glued, tucked, or secured with spline depending on your project style.
Use sharp scissors or a clean cutting tool to trim the sheet. Keep the open mesh pattern straight while cutting, and check the roll width, groove depth, and visible panel area so the finished panel looks even.
For chair seats, cabinet doors, and furniture panels, compare your project measurements with 24 cane webbing sold by the running linear foot if you need a different buying format.
Installation Tips
Soak or dampen the cane webbing in warm water before installation so it becomes flexible and easier to shape. If no exact soaking time is provided, test a small section first, and avoid forcing dry cane into corners, grooves, or curved areas because it may crack or split.
Install the webbing while it is still flexible, then allow it to dry fully after fitting. As it dries, the cane can tighten and settle into the frame. Do not over-stretch the sheet, because too much tension can distort the open mesh pattern.
For cabinet door projects, follow a cane webbing cabinet door guide before cutting and securing the sheet.
Before You Buy
Confirm your opening size, visible panel area, weave match, and preferred installation method before cutting. This 24-inch wide roll is helpful for wider panels, but large multi-panel projects may need more length or a different buying format.
Care and Maintenance
Clean finished cane webbing with a soft dry cloth or lightly damp cloth. Avoid harsh cleaners, long-term moisture, high humidity, and heavy pulling on the open mesh.
Store unused cane webbing indoors in a dry place. Do not crush the roll under heavy items, and avoid direct outdoor weather unless the finished furniture is sealed or designed for that use.
