18″ Width Square Cane Webbing – 18″ x 5 Ft Sheet – Rattan Cane Webbing Roll -Caning Material for Chairs, Cabinet, Door -Open Weave Wicker Woven Rattan Sheets – Cane Fabric (5 FEET)

This 18-inch wide square cane webbing sheet is made for furniture repair, decorative panels, cabinet inserts, chair backs, door panels, room dividers, and other DIY rattan projects. The open square weave gives your project a clean natural look while allowing light and airflow through the panel.

Use this material when you want pre-woven cane sheets rather than individual strand cane for drilled-hole chair seats. It is best for framed openings, groove-style panels, and decorative surfaces where a sheet of cane webbing can be cut and secured into place.

Description

Product Details

Product type: square cane webbing roll / sheet
Size: 18 inches wide x 5 feet long
Material: natural rattan cane
Weave style: open square weave
Product dimensions: 19 x 2 x 2 inches
Item weight: 12.8 ounces
Best for: chairs, cabinet doors, door panels, shelves, ceiling accents, room dividers, headboards, and craft projects
Package includes: cane webbing roll/sheet only, unless other accessories are confirmed on the product listing
Tools, tape, glue, spline, frame, and installation hardware are not included unless specifically listed

Best Uses for This Square Cane Webbing

This cane webbing works well for cane-backed chairs, cabinet panels, shelves, divider screens, and cane webbing for cabinet doors where the frame already supports a sheet insert. It can also be used for furniture makeovers, decorative wall panels, and handmade home decor projects.

For smaller decorative panels, a square rattan cane webbing roll can help you match the same open-weave look in another size. Use this 18-inch sheet for a slightly wider project, or compare it with natural rattan cane webbing when you need another roll width or finish.

Measuring and Cutting Guidance

Measure your opening before cutting the sheet. Leave extra material around the edges so the cane webbing can sit securely inside the frame or groove. Cut slowly with sharp scissors or a craft knife to help keep the weave even and reduce fraying.

Check the weave direction before cutting, especially for visible cabinet doors, chair backs, or decorative panels. A straight pattern will make the finished project look cleaner.

Installation Notes

Natural rattan can feel stiff when dry. Lightly dampen or soak the cane webbing for a short time before fitting it into a frame, especially if the project has curves or tight corners. Let the material dry fully after installation so it can settle into place.

This sheet is not the same as loose strand cane for hand-caning through drilled holes. If your chair has holes around the seat frame, choose strand cane instead of pre-woven cane webbing.

Care and Storage

Store unused cane webbing in a dry indoor area away from heavy moisture and direct heat. After installation, clean the finished surface with a soft dry cloth or a lightly damp cloth.

Browse related rattan weaving supplies if your project also needs cane, reed, spline, or other repair materials.