Square radio weave open mesh rattan cane webbing texture

18” Width Natural Rattan Cane Square Webbing | 18” W x 7 ft L | Rattan Radio Weave, Cane Webbing Roll for Caning Projects, Chair, Cabinets, Celing, Rattan Sheets, Woven Open Mesh Cane (7 FEET)

This 18 inch wide natural rattan cane square webbing roll is made for DIY caning, chair backs, cabinet inserts, ceiling panels, drawer fronts, and furniture decor projects. The 7 foot length gives buyers enough material for small to medium repair or decorative work, while the square / radio weave open mesh keeps the finished surface breathable and natural-looking.

Use this cane webbing when you need a flexible rattan sheet that can be measured, cut, soaked, and fitted into a frame or groove. It works best for indoor furniture projects, cabinet panels, chair backs, and craft surfaces where a natural woven cane look is needed, but chair seats or weight-bearing areas should be checked for proper frame support and installation method.

Description

Product Details

Product type: Natural rattan cane square webbing roll
Size: 18 inch width x 7 feet length
Approximate coverage: About 10.5 square feet before trimming
Product dimensions: 84 x 18 x 0.3 inches
Item weight: 1.1 pounds
Material: Natural rattan cane
Weave style: Square / radio weave open mesh
Fit note: Exact weave opening and strand thickness are not listed, so compare the roll with your existing panel, groove, or project opening before cutting
Main uses: Chair backs, cabinet inserts, ceiling panels, furniture inserts, caning projects, and DIY decor
Category: Rattan Weaving Supplies

Best Uses

This cane webbing is useful for replacing worn woven panels on chair backs, cabinet doors, drawer fronts, and decorative furniture surfaces. For projects that need a longer roll in a similar width, the 18 width rattan webbing option can help you compare size before cutting material.

For wider furniture panels, large cabinet fronts, or projects where extra side coverage is needed, 24 width rattan webbing may reduce seams on bigger surfaces. For narrower repair areas, 14 width cane webbing can be easier to handle when the frame or insert space is smaller.

How to Prepare and Install

Measure the frame opening carefully before cutting the webbing. Leave a little extra material around the edges so it can be trimmed after fitting, tucked into a groove, stapled, glued, or secured with spline depending on your project style.

Before installation, soak the cane webbing in warm water for about 20 to 30 minutes or follow your project instructions. Test a small section first, avoid over-soaking, and keep the webbing evenly aligned while setting it into place.

Buyer Guidance

Choose this 18 inch x 7 foot roll if you need natural cane material for a medium-size furniture or decor project. For chair seat repairs that need mesh, spline, wedges, and instructions together, a pressed cane webbing kit may be more convenient than buying each supply separately.

If you are comparing different flat woven rattan options, review cane sheets to choose the size and pattern that matches your project. Always check the width, length, weave opening, color tone, groove fit, and installation method before cutting the material.

Care and Maintenance

Keep finished cane webbing away from constant moisture, high humidity, harsh outdoor weather, and strong direct sunlight unless your furniture is properly protected. Clean gently with a dry or slightly damp cloth, and avoid soaking the installed cane surface after the project is complete.

Natural rattan can vary slightly in tone, strand thickness, and texture. This is normal for cane material and should be checked against your furniture finish before final installation.