Chair Cane Medium 3mm 270 ft Coil with 1 Strand of 4mm Binder Cane

This medium 3mm chair cane is made for hand-caning chair seats and backs that have drilled holes around the frame. It includes a 270-foot coil of chair cane plus 1 strand of 4mm binder cane for finishing the outer edge of the woven seat.

Use this product with other chair caning supplies when repairing drilled-hole cane chairs, restoring older furniture, or replacing worn strand cane.

Category: Weaving & Spinning Supplies Tags: 270 ft coil of Medium 3mm strand chair cane, 3mm 270 ft Coil, 3mm strand chair cane, 4mm Binder Cane, Amazon Cane Chair, Amazon Caning, Amazon Chair Webbing, binder cane, Buy Cane Chairs, Buy Cane For Chairs, Cane Chair, Cane Making Materials, Cane Making Supplies, Cane Material, Cane Material For Chairs, Cane Material Supplies, Cane Products, Cane Weaving, cane weaving chair, cane weaving near me, Cane Weaving Supplies, caneing, caneing chairs, caneing material, caneing supplies, caning chairs cost, caning chairs near me, Caning Kit, Caning Material, caning near me, Caning Supplies, Caning Supplies Amazon, Caning Tools, Chair Cane, Chair Cane For Sale, Chair Cane Medium, Chair Caneing, Chair Caning And Supplies, Chair Caning Kit, chair caning near me, Chair Caning Products, Chair Caning Supplies, Chair Caning Supplies Amazon, chair caning supplies for sale, chair caning supplies near me, Chair Caning Tools, chair weaving, Chair Weaving Material, chair weaving near me, Chair Weaving Supplies, small cane chair, Weaving And Spinning Supplies

Description

Product Details

Cane size: medium 3mm chair cane
Cane length: 270 feet
Binder cane included: 1 strand of 4mm binder cane
Material listed: reed
Color: beige
Brand / manufacturer: V.I. Reed & Cane, Inc.
Part number: M270
Listed item weight: 0.25 pounds
Listed package dimensions: 6.26 x 5.83 x 1.57 inches
Suggested fit: 1/4-inch drilled holes with about 3/4-inch spacing from hole center to hole center
Best for: hand-caned chair seats and backs with drilled holes, not pressed cane webbing grooves

Best Uses

This 3mm cane is useful for repairing chair seats and backs that are woven strand by strand through drilled holes. It is a good choice when your chair opening, hole size, and hole spacing match medium chair cane.

For smaller holes or tighter spacing, compare this product with narrow medium chair cane before ordering. For larger drilled holes or wider spacing, you may want to review common 3.5mm chair cane instead.

If you need a full project set with cane, tools, pegs, and instructions, a complete medium chair caning kit may be easier than buying each part separately.

Fit and Measuring Notes

Before ordering, check that your chair is designed for hand caning. Hand-caned chairs have individual drilled holes around the seat or back frame. Pressed cane chairs have a routed groove and use pre-woven cane webbing with spline.

Measure the diameter of the drilled holes and the distance from the center of one hole to the center of the next. These measurements help confirm whether medium 3mm cane is the right size for your chair.

Preparation and Weaving Notes

Soak the cane in warm water before weaving so it becomes flexible enough to pass through the chair holes without cracking. Work with the cane while it is damp, and re-dampen small sections if they start to dry during the project.

Keep the first rows slightly loose so the weave can be adjusted, then tighten gradually as the pattern develops. Use the included binder cane to finish the outer edge after the main seat pattern is complete. If you need extra edge material, keep 4mm binder cane available before starting.

Care and Maintenance

After weaving, let the chair cane dry fully before regular use. As it dries, the cane will tighten into place.

Keep the finished cane away from heavy moisture, harsh cleaners, and direct outdoor weather. Dust with a soft cloth and wipe light dirt with a slightly damp cloth when needed.