Product Details
- Product name: Commonwealth Basket Comcraft Chair Caning Kit, Medium 3mm Cane
- Cane size: Medium 3mm chair cane
- Fit guidance: for seats with 1/4-inch holes spaced 3/4-inch apart
- Project type: hand-caned chair seat repair
- Coverage: made for one average-size chair seat
- Includes: chair cane, binding cane, caning awl, four caning pegs, and instructions
- Instructions: includes twenty-five photographs showing each step
- Product dimensions: 8.9 x 2.3 x 10.9 inches
- Shipping weight: 7.2 ounces
- Imported
- Category: Basket Making Supplies
Best Uses For This Chair Caning Kit
Use this kit when your chair has drilled holes around the seat opening and needs a new woven cane seat. It is suitable for traditional hand caning where each cane strand is woven through the holes in the chair frame.
If your chair has a groove around the opening instead of drilled holes, review a pressed cane webbing kit instead because this kit is not made for spline-style cane replacement.
Fit And Measuring Notes
Before ordering, check the hole diameter and spacing on your chair seat. This kit is listed for 1/4-inch holes spaced 3/4-inch apart. If your chair has smaller or closer holes, a different cane size may be a better fit.
For a smaller cane size, compare the Commonwealth Basket Comcraft Chair Caning Kit, Fine 2-1/2mm Cane before choosing this medium 3mm option. If your chair needs a slightly narrower cane, the Chair Caning Kit Narrow Medium 2.75mm Chair Cane may be a better match.
What Comes In The Kit
This kit includes the basic supplies needed for one hand-caning project. The cane is used to weave the seat, the binding cane finishes the outside edge, the awl helps guide the cane through the holes, and the pegs help hold strands in place while you work.
For a larger repair set with more included material, compare this product with the complete chair caning kit before deciding which kit fits your project best.
Setup And Care Tips
Soak the cane as directed before weaving so it becomes flexible enough to pass through the chair holes without cracking. Work slowly, keep the rows even, and avoid pulling the cane too tight while it is wet because cane naturally tightens as it dries.
After the seat is finished, allow it to dry fully before regular use. Keep the chair away from long periods of outdoor moisture, direct weather, and extreme dryness to help protect the woven cane.
Buyer Guidance
Choose this kit if your chair has drilled holes, needs medium 3mm cane, and is an average-size hand-caned chair seat. Do not use it for pressed cane webbing seats, groove-style seats, or chairs that require a different hole size or spacing.
If you want a general hand-caning kit option, compare this product with the Chair Caning Kit before placing your order.
