2.5 mm Fine Chair Cane - 1 Pound Coil - Rattan Peel Cane for Hole-to-Hole Caning - Chair Seat Weaving and Wicker Furniture Making Supplies - UA-250-RC - 6

2.5 mm Fine Chair Cane - 1 Pound Coil - Rattan Peel Cane for Hole-to-Hole Caning - Chair Seat Weaving and Wicker Furniture Making Supplies - UA-250-RC - 5

2.5 mm Fine Chair Cane - 1 Pound Coil - Rattan Peel Cane for Hole-to-Hole Caning - Chair Seat Weaving and Wicker Furniture Making Supplies - UA-250-RC - 4

2.5 mm Fine Chair Cane | 1 Pound Coil | Rattan Peel Cane for Hole-to-Hole Caning | Chair Seat Weaving and Wicker Furniture Making Supplies | UA-250-RC

This 2.5 mm fine chair cane is made for traditional hole-to-hole chair caning, chair seat weaving, wicker repair, and small furniture restoration projects. The 1 pound coil gives makers and restorers enough rattan peel cane material for hand-weaving chair seats, round seat openings, and other woven furniture details.

This product is best for projects where individual cane strands are woven through drilled holes instead of using pre-woven cane webbing or spline. Before ordering, check your chair hole size, spacing, and existing cane thickness so the 2.5 mm size matches your repair or restoration project.

Description

Product Details

Product Type: Fine chair cane coil
Material: Rattan peel cane
Size: 2.5 mm
Coil Weight: 1 pound
Item Model Number: UA-250-RC
Product Dimensions: 14 x 14 x 3 inches
Item Weight: 1.08 pounds
Best For: Hole-to-hole chair caning, chair seat weaving, wicker furniture repair, round seat weaving, and DIY furniture restoration

Best Uses for This Fine Chair Cane

This cane is suitable for hole-to-hole chair caning, chair seat repair, round seat weaving, wicker furniture restoration, and small hand-weaving projects. It is a better fit for traditional drilled-hole chair frames than for pressed cane webbing projects.

If you are comparing similar size options, review 2.50mm strand cane seat weaving before choosing the final material. For projects that need a nearby cane size, chair caning kit narrow medium may also help you compare a 2.75 mm chair cane option.

Measuring Before You Start

Before weaving, check the old cane size, hole diameter, and hole spacing on the chair frame. A fine 2.5 mm cane is generally used for smaller holes and finer weaving patterns, but the correct size should always be matched to the actual chair frame.

If you are unsure about size selection, the chair caning guide can help buyers understand how cane quality, size, and project type affect the final repair. Do not use this coil as a replacement for sheet cane webbing unless your project specifically requires individual strand weaving.

Soaking and Weaving Notes

Soak the rattan peel cane in water for about 15–20 minutes before use so it becomes flexible enough for weaving. Avoid over-soaking, because the cane should bend easily without becoming weak or overly soft.

Work slowly while weaving through the chair holes and keep the tension even across the seat. Pulling too tightly can stress the cane, while leaving it too loose can affect the finished pattern. Let the seat dry fully after weaving so the cane can tighten naturally.

Care and Project Check

This cane is useful for chair seat weaving, wicker furniture repair, and other traditional caning work. For finishing or wrapping support on related projects, compare binding cane for seat weaving if your repair also needs binder cane or wrapping material.

Clean finished cane seats gently with a dry or slightly damp cloth. Avoid harsh cleaners, standing water, and heavy pressure on fresh weaving. Before publishing or ordering, confirm that the 2.5 mm cane size matches the exact chair repair method.