50′ Roll 1/2” Fine Open Cane Webbing 18” Wide, 50 Foot Long Roll

This 50 foot roll of 1/2-inch fine open cane webbing is made for larger chair caning, furniture repair, cabinet door inserts, and projects that need an 18-inch wide continuous cane mesh. It is a practical option when you need more than a small cut piece and want the webbing to stay continuous for longer repair work.

Use this roll for groove-style pressed cane repairs, furniture panels, cabinet inserts, and similar cane webbing projects where a sheet can be trimmed and secured into place. Always measure the opening before ordering so you have enough material for fitting, trimming, and installation.

Description

Product Details

Product name: 50 ft 1/2-inch Fine Open Cane Webbing Roll, 18 inches wide
Width: 18 inches
Roll length: 50 feet
Mesh style: 1/2-inch fine open cane webbing
Hole spacing: approximately 1/2 inch from center of hole to center of hole
Product dimensions: 21 x 6 x 6 inches
Shipping weight: 2 pounds
Best for: chairs with a groove in the wood, cabinet panels, furniture inserts, and cane webbing repair
Not for: chairs with drilled holes around the seat frame
Quantity note: quantity of 1 equals one 50 foot roll; quantity of 2 equals two 50 foot rolls

Best Uses for This 18-inch Wide Cane Webbing Roll

This cane webbing roll is suitable for pressed cane chair seats, chair backs, cabinet doors, room dividers, decorative furniture panels, and restoration projects where a fine open cane pattern is needed. The 18-inch width works well for many standard chair and furniture panel repairs, but the project opening should always be measured before ordering.

If you need a smaller roll, compare the 10 Roll 1/2 Fine Open Cane Webbing 18 Wide 10 Foot Long Roll. For shorter custom cuts, review 1/2 Open Cane Webbing 18 Wide Fabric By The Foot or 18 Wide Cane Webbing #109 Sold By Linear Foot.

Important Fit and Compatibility Notes

This product is intended for furniture pieces that use a groove and spline method. It is not the correct material for traditional hand-caned chairs that have individual drilled holes around the seat frame.

Before buying, measure the full width and length of the area being repaired. Allow extra material around the edges so the cane can be trimmed and seated properly into the groove. If your project uses a wider panel, check 1/2 Open Cane Webbing 24 Wide Fabric By The Foot or Roll 1/2 Fine Open Cane Webbing 24 Wide 10 Foot Long Roll.

Installation and Handling Tips

Lightly dampen or briefly soak the cane webbing only as needed for your repair method, then let it become flexible before placing it into the groove. Avoid over-pulling the webbing while fitting it, because too much tension can distort the open mesh pattern.

Use the correct spline size and proper caning tools for the groove. Trim edges carefully after the webbing is seated. If you are repairing a chair seat, confirm whether the old seat used pressed cane webbing or hand-woven strand cane before starting.

Care and Storage

Store the roll in a clean, dry indoor space before use. Keep unused cane webbing away from long moisture exposure, direct rain, and heavy bending. Finished cane panels should be dusted with a soft brush or cloth and kept out of damp conditions when possible.

Buyer Reference

For price, availability, roll length, and review comparison, you may compare the 50 foot cane webbing roll on Amazon before purchasing. Confirm that the 18-inch width and 1/2-inch fine open mesh match your chair, cabinet, or furniture repair project.