10′ Roll 1/2” Fine Open Cane Webbing 18” Wide, 10 Foot Long Roll

This 10-foot roll of 1/2-inch fine open cane webbing is made for pressed cane chair seats, chair backs, cabinet inserts, and small furniture repair projects. The roll is 18 inches wide and uses a pre-woven open cane pattern with approximately 1/2-inch spacing from the center of one hole to the center of the next.

This cane webbing is for chairs and furniture frames with a routed groove around the opening. It is not for hand-caned chairs that have individual drilled holes around the seat or back.

Description

Product Details

Roll size: 18 inches wide x 10 feet long
Weave style: 1/2-inch fine open cane webbing
Hole spacing: approximately 1/2 inch from center to center
Product dimensions: 21 x 4 x 4 inches
Listed shipping weight: 2 pounds
Package quantity: 1 roll
Suggested use: pressed cane chair seats, chair backs, cabinet panels, furniture inserts, and repair projects
Compatibility: for groove-style pressed cane projects, not drilled-hole hand caning

Best Uses

This roll is useful when you need more material than a small repair sheet. It can be used for multiple small chair panels, larger framed inserts, or furniture projects where the cane webbing is secured into a groove with spline.

For wider furniture or cabinet openings, compare this roll with 24-inch fine open cane webbing before ordering. If you need a smaller repair set that includes mesh, spline, wedges, and instructions together, a pressed cane webbing kit may be easier for a single chair project.

Fit and Compatibility Notes

Before buying, confirm that your chair or furniture piece uses pressed cane. Pressed cane fits into a routed groove and is held in place with spline. Hand caning is different because individual cane strands are woven through drilled holes.

Measure the opening before cutting. Leave extra cane webbing around all sides so you have enough material to align, press into the groove, secure with spline, and trim after installation.

Preparation and Installation Notes

Soak the cane webbing in warm water before installation until it becomes flexible enough to work with. Avoid forcing dry cane into the groove because it can crack or split.

Remove the old cane and spline first, then clean the groove before fitting the new webbing. Keep the open weave pattern straight while positioning the sheet. Use the correct spline size for your groove, and use wooden wedges to help press the cane evenly into place.

For extra tool planning, review our chair caning tools guide before starting your repair.

Care and Maintenance

After installation, let the cane dry fully so it can tighten into place. Keep natural cane away from heavy moisture, harsh cleaners, and direct outdoor weather.

Dust with a soft cloth and wipe light dirt with a slightly damp cloth when needed. Let the cane dry completely before regular use.