Product Details
- Product: Fiber Rush Kit 5/32 Kraft Brown With Instruction Booklet
- Material type: fiber rush
- Size listed: 5/32
- Color listed: kraft brown
- Coil length shown: 320 feet
- Included item: 5/32 kraft brown fiber rush material with instruction booklet
- Product dimensions listed: 7.5 x 5 x 7.5 inches
- Shipping weight listed: 1.85 pounds
- Best for: rush seat weaving, chair seat repair, ladderback chairs, chair restoration, and beginner seat-weaving practice
- Coverage note: 320 feet is intended for a small chair seat, but the exact number of seats depends on the frame size, pattern, tension, and waste
- Chair type note: best for rush-style chair seats; not for pressed cane grooves, hole-to-hole chair cane, or natural rush projects unless your instructions allow fiber rush
If you already have instructions and only need replacement material, compare fiber rush 5/32 kraft brown before ordering the full kit.
What This Fiber Rush Kit Is Best For
This kit is best for chair seats that use fiber rush instead of cane webbing, flat reed, chair cane, or natural rush. Fiber rush is a twisted, paper-based seat-weaving material; cane webbing is a pre-woven sheet, chair cane is woven through drilled holes, and natural rush is a different seat-weaving material. It is useful for repairing a worn woven seat or practicing a traditional rush-style chair seat project.
For a slightly larger fiber rush size, compare the fiber rush kit 6/32 kraft brown with instruction booklet before choosing your size.
If you are repairing multiple chairs, review the 10 pound reel of fibre rush size 5/32 instead of buying a smaller kit.
Choosing the Right Rush Size
The 5/32 size should match the needs of your chair seat and weaving pattern. Choose it when your old seat or instruction pattern calls for 5/32 fiber rush; if the chair originally used a larger rush size, natural rush, cane webbing, or hole-to-hole cane, the finished seat may look too tight, too loose, or uneven.
Check the old seat material, chair frame size, rail shape, and instruction booklet before starting. Fiber rush, chair cane, reed spline, binder cane, flat reed, natural rush, and cane webbing are different materials, so do not substitute them unless your project instructions allow it.
Setup and Weaving Guidance
Before starting, remove the old seat material and inspect the chair frame. Make sure the rails are clean, stable, and ready for weaving. The instruction booklet is especially helpful for beginners because it gives a clear starting point for the weaving order and seat pattern.
Follow the instruction booklet step by step and keep the fiber rush tension even as you work around the seat. Pull the material firmly enough to create a neat seat, but avoid over-tightening because too much pressure can stress the chair frame or make the pattern uneven.
For setup support during seat work, oak hardwood caning wedges may help hold material in place on some chair repair projects.
Care and Storage
Store unused fiber rush in a dry indoor area away from moisture and direct heat. Keep the coil clean and loosely wrapped so it does not flatten or tangle before use.
After the seat is woven, keep the chair indoors and avoid soaking the finished fiber rush seat. Paper-based fiber rush can weaken or lose shape with too much moisture, so clean gently with a dry or lightly damp cloth when needed. Kraft brown shade and surface texture may vary slightly, which is normal for this type of seat-weaving material.
Related Seat Weaving Material
If your project calls for a different rush-style material, compare twisted seagrass rush before choosing your repair supply.
