Natural pre woven open mesh cane webbing texture

14 inch cane webbing sheet for chair back repair

14″ Width x 3.3 Feet Cane Rattan Webbing Roll for Caning Projects, Cane Webbing Sheet, Natural Pre-Woven Open Mesh Cane for Furniture Chair Cabinet Ceiling Bed Door

This 14” Width x 3.3 Feet Cane Rattan Webbing Roll is a natural pre-woven open mesh cane sheet for small furniture updates, chair backs, cabinet panels, ceiling accents, bed details, door inserts, and DIY caning projects. The open mesh pattern gives furniture a classic woven cane look while keeping the material flexible enough to cut and fit into framed areas.

This size is useful for smaller caning projects where a short roll is enough. Based on 14 inches x 3.3 feet, the roll covers about 3.85 square feet before trimming, so measure the usable area before cutting.

Description

Product Details

Product: 14” Width x 3.3 Feet Cane Rattan Webbing Roll
Listed size: 14 inches wide x 3.3 feet long
Material listed: rattan
Color listed: beige
Weave style: natural pre-woven open mesh cane
Brand listed: ToLanbbt
Package dimensions listed: 14.25 x 2.4 x 2.32 inches
Item weight listed: 5.6 ounces
Best for: furniture panels, chair backs, cabinet inserts, ceiling décor, bed accents, door panels, and small DIY caning projects

For a similar short-roll option, compare 14 width cane webbing 3.3feet before choosing the right material for your project.

What This Cane Webbing Is Best For

This cane webbing is best for small or medium framed openings where a natural woven rattan sheet can be secured into place. It is suitable for decorative panels, chair backs, cabinet doors, dresser panels, headboard accents, ceiling details, decorative doors, and craft projects. For chair seats or other weight-bearing areas, confirm that the frame, support, and installation method are suitable before using it.

If you need more length for a larger project, review 14 width cane webbing 9 feet before ordering.

For a slightly longer 14-inch width option, compare Milkary natural rattan cane webbing 14 widthx4.9feet as another relevant size.

Measuring and Cutting Notes

Measure your project opening carefully before cutting the webbing. Leave extra material around the edges so the cane can be secured into a frame, groove, or panel area. If your project needs an exact mesh opening, thickness, or groove fit, verify those details first because they are not listed in the provided product details.

Use sharp scissors or a clean cutting tool for smoother edges. Natural rattan can vary slightly in color, thickness, and weave spacing, so inspect the roll before cutting and place the best-looking section where it will be most visible.

Installation Guidance

Before installation, soak or dampen the rattan cane webbing as directed so it becomes more flexible and easier to work with. If no exact soaking time is provided, start with a short dampening test and avoid over-soaking. Do not force dry cane into tight corners or grooves, because it may crack or split.

After soaking, remove extra water with a towel and install the webbing while it is flexible. For groove or spline installation, confirm the groove size, spline choice, and whether glue, staples, or a frame are required for your project. Let the finished project dry fully so the cane can tighten and settle into place.

For cabinet and furniture panel planning, the cane webbing cabinet door guide can help with measuring, fitting, and installation steps.

Care and Maintenance

Clean finished cane webbing with a soft dry cloth or lightly damp cloth. Avoid soaking installed cane for long periods, and do not use harsh cleaners on natural rattan.

Keep finished projects away from long-term moisture, direct outdoor weather, high humidity, and extreme heat unless the furniture finish is designed for that use. This material is better for indoor or protected decorative applications unless sealed and tested for your use case.