Product Details
- Product: 18” Width Rattan Pressed Cane Webbing Sheet
- Listed size: 18” W x 40” L / 3.3 ft
- Material listed: natural rattan
- Weave style: net woven open mesh cane
- Package dimensions listed: 17.75 x 2.75 x 2.75 inches
- Item weight listed: 9.6 ounces
- Best for: chair backs, cabinet doors, furniture panels, decorative inserts, screens, small caning projects, DIY supplies, and indoor rattan décor work
- Installation type: measure, cut, soak or dampen, and fit into the project area with the correct frame, groove, spline, staples, or adhesive method for your project
- Approximate coverage: about 5 square feet before trimming and edge allowance
- Mesh and thickness note: exact mesh opening, cane strand size, and thickness are not listed, so verify your pattern or project requirements before cutting
- Use note: best for chair backs, cabinet inserts, and decorative panels; for chair seats or weight-bearing areas, confirm the frame support and installation method first
For a similar 18-inch short roll, compare 18 width natural rattan webbing 3 feet before choosing the best size for your project.
What This Cane Webbing Is Best For
This pressed cane webbing sheet is best for framed openings where a pre-woven rattan sheet can be secured into a groove, frame, or panel area. It is mainly suited for chair backs, cabinet doors, drawer fronts, table accents, screens, and decorative furniture repair projects. For chair seats or other weight-bearing use, confirm that the frame, groove, support, and installation method are suitable before using this material.
If you need a longer 18-inch roll for multiple panels, review 18 width rattan webbing 15 feet before ordering.
For a mid-size roll in the same width range, compare CLAYNIX 18 width wicker cane webbing as another relevant option.
Measuring and Cutting Notes
Measure your project opening carefully before cutting the webbing. Leave extra material around each side so the cane can be secured properly into the frame, groove, or panel area.
Use sharp scissors or a clean cutting tool for smoother edges. Natural rattan may vary slightly in color, thickness, strand size, and weave spacing, so inspect the roll before cutting and place the best-looking section where it will be most visible. If your project needs a specific mesh opening or thickness, verify those details before installation.
Installation Guidance
Before installation, soak or dampen the rattan cane webbing as directed so it becomes more flexible. If an exact soaking time is not provided, start with a short dampening test and avoid over-soaking. This helps the material bend and fit more easily without cracking during installation.
After soaking or dampening, remove extra water with a towel and install the webbing while it is still flexible. Do not force dry cane into tight corners, grooves, or curves. Let the finished project dry fully so the cane can tighten and settle into place.
For cabinet and furniture panel planning, the cane webbing cabinet door guide can help with measuring, fitting, and installation steps.
Care and Maintenance
Clean finished cane webbing with a soft dry cloth or lightly damp cloth. Avoid soaking installed cane for long periods, and do not use harsh cleaners on natural rattan.
Keep finished projects away from long-term moisture, high humidity, direct outdoor weather, and extreme heat unless the furniture finish is designed and sealed for that use. For outdoor or damp areas, test the finish and material suitability before installing.
Related Material Options
If you need another 18-inch roll length, compare 18 width rattan cane webbing roll 5 feet before selecting your final material.
For very small repair areas, review 18 width 1 feet open natural rattan webbing before buying a larger roll.
