16″ Width Square Rattan Cane Webbing Roll 3.3 Feet for Caning Projects Fine Radio Net Mesh Pre Woven Open Weave Wicker Woven Rattan Sheets Caning Material for Chairs, Cabinet, Door (3 FEET)

This 16-inch width square rattan cane webbing roll is a pre-woven radio net mesh sheet for small furniture repair, cabinet inserts, chair panels, door accents, and DIY woven decor projects. The square open weave gives a different look from traditional hexagon cane webbing and works well on framed surfaces where the sheet can be secured around the edges.

Use this cane webbing for chair backs, cabinet doors, drawer fronts, decorative panels, room dividers, and other light caning projects.

Description

Product Details

Product type: Pre-woven rattan cane webbing roll
Width: 16 inches
Length: 3.3 feet
Weave style: Square radio net mesh / open weave
Material: Natural rattan cane
Best use: Chair backs, cabinet doors, furniture panels, DIY caning projects, and decorative inserts
Compatibility: Best for flat panel projects, cabinet inserts, and furniture frames designed for cane webbing
Tools, spline, glue, and installation supplies: Not confirmed as included

Best Uses for This Rattan Cane Webbing

Use this cane webbing for furniture pieces where a natural woven panel is needed. It can work well for chair backs, cupboard doors, cabinet inserts, room dividers, headboard accents, craft panels, and small restoration projects.

For more similar material options, buyers can also browse the rattan weaving supplies category to compare different widths, weave styles, and roll lengths.

Before You Order

Measure the full area you need to cover before placing an order. Add extra length and width for trimming, edge fitting, and mistakes during installation. This 16 inch width is best for smaller panels or narrow furniture sections.

If your project needs a wider roll, compare this item with the 18 inch natural rattan cane webbing roll before choosing the final size.

Compatibility and Fit

This product is best for furniture and decorative panels that use pre-woven cane webbing. It is not the same as strand cane used for hand-caning chairs with individual drilled holes around the frame.

For smaller-width projects, you may also compare it with the 14 inch natural rattan cane webbing roll to decide which width fits your chair, cabinet, or panel opening better.

Preparation and Installation Notes

Before installation, lightly soak the rattan cane webbing so it becomes more flexible and easier to position. Do not oversoak it, and avoid forcing dry cane into tight spaces because this can cause cracking, uneven tension, or broken strands.

Cut the webbing carefully after measuring your frame. Keep the weave aligned while fitting it into the project area. If the panel uses a groove-and-spline method, confirm the correct spline size and installation supplies before starting.

Care and Maintenance

After installation, allow the cane webbing to dry naturally so it tightens into place. Keep the finished surface indoors or in a dry protected area. Avoid direct rain, heavy moisture, harsh cleaners, and long exposure to damp conditions.

Clean the woven surface gently with a soft dry cloth. For decorative furniture and cabinets, avoid pulling or pressing too hard on the cane openings because natural rattan can split if handled roughly.