14 Width Cane Webbing 2Feet, Natural Rattan Webbing for Caning Projects, Woven Open Mesh Cane for Furniture, Chair, Cabinet, Ceiling - 8

14 Width Cane Webbing 2Feet, Natural Rattan Webbing for Caning Projects, Woven Open Mesh Cane for Furniture, Chair, Cabinet, Ceiling - 7

14 Width Cane Webbing 2Feet, Natural Rattan Webbing for Caning Projects, Woven Open Mesh Cane for Furniture, Chair, Cabinet, Ceiling - 6

14 Width Cane Webbing 2Feet, Natural Rattan Webbing for Caning Projects, Woven Open Mesh Cane for Furniture, Chair, Cabinet, Ceiling - 5

14 Width Cane Webbing 2Feet, Natural Rattan Webbing for Caning Projects, Woven Open Mesh Cane for Furniture, Chair, Cabinet, Ceiling - 4

14″ Width Cane Webbing 2Feet, Natural Rattan Webbing for Caning Projects, Woven Open Mesh Cane for Furniture, Chair, Cabinet, Ceiling

This 14-inch width natural rattan cane webbing is made for caning projects, chair backs, cabinet doors, ceiling panels, furniture inserts, and small DIY décor repairs. The 2-foot length is useful for smaller panel work, sample projects, or a single furniture repair where a long roll is not needed.

The woven open mesh pattern gives furniture a classic cane look while keeping the panel light and breathable. Before ordering, measure your chair, cabinet, ceiling, or furniture opening carefully and leave extra material around the edges for trimming, fitting, and securing.

Description

Product Details

Product Type: Natural rattan cane webbing sheet / roll
Material: Natural rattan
Width: 14 inches
Length: 2 feet / 24 inches
Size: 14″W x 24″L
Product Dimensions: 24 x 14 x 0.5 inches
Item Model Number: TB-35-60
Item Weight: 4.2 ounces
Pattern: Woven open mesh cane
Best For: Chair backs, cabinet doors, ceiling panels, furniture inserts, craft panels, and DIY caning projects

Best Uses for This Natural Cane Webbing

This sheet is useful for cane webbing for cabinet doors, chair back repairs, small furniture panels, ceiling accents, and decorative caning projects. The 14-inch width works well for narrower frames where wider cane webbing may create too much waste.

If your project needs a longer same-width option, compare 14 width cane webbing before choosing the final size. For buyers who want another 14-inch pre-woven roll, 14 width cane rattan webbing roll can also be reviewed before ordering.

Measuring and Cutting Before Installation

Measure your project opening in more than one place before cutting the cane webbing. Leave extra material on each side so the sheet can be aligned, pulled into place, trimmed, and secured properly.

Before installation, soak the natural rattan cane webbing in warm water for about 15–30 minutes or follow the supplier’s exact instruction. This helps the cane become more flexible for fitting. After installation, allow it to dry fully so the material can tighten naturally.

Installation and Project Notes

This cane webbing can be installed with a framed panel setup, staples, adhesive, or groove-and-spline method depending on your furniture design. Always check your frame depth, groove size, and fastening method before starting.

For larger 14-inch projects, 14 width cane webbing roll may be a better option than this 2-foot sheet. If you need general DIY guidance before cutting and fitting the material, review pre woven cane sheets for helpful cane sheet handling tips.

Care and Buyer Check

Clean the finished cane surface gently with a dry or slightly damp cloth. Avoid harsh cleaners, long moisture exposure, and heavy pressure on fresh cane work. Since natural rattan can vary, slight shade, thickness, and texture differences may appear from piece to piece.

Choose this product if you need a 14-inch wide, 2-foot long natural rattan cane webbing sheet for a small chair, cabinet, ceiling, or furniture panel project. Before buying, confirm the exact size, weave pattern, hole size, and installation method needed for your project.