24″ Width Square Rattan Cane Webbing Roll 5 Feet for Caning Projects Fine Radio Net Mesh Pre Woven Open Mesh Cane Webbing Sheet Natural Rattan Cane Webbing Roll Cabinet Chair (5 Feet)

This 24″ width square rattan cane webbing roll is made for furniture caning, cabinet inserts, chair panels, door panels, decorative screens, and small DIY home decor projects. The open mesh square pattern gives a natural woven look while keeping the sheet flexible enough for trimming and fitting into flat or framed surfaces.

The 5-foot roll is useful when you need enough material for a chair back, cabinet door insert, drawer front, small wall panel, or craft repair project. Because rattan is a natural material, slight shade, texture, and edge variation can happen from roll to roll.

Description

Product Details

Square Rattan Cane Webbing Roll Size: 5 Feet
Material: Rattan
Color: Natural Rattan
Brand: CELEZAR
Pattern: Solid
Product Care Instructions: Hand Wash Only
Product Dimensions: 60″L x 24″W
Weave Type: Braided
Item model number: CELEZAR12345
Item Weight: 12 ounces

Best Uses

This cane webbing is suitable for chair backs, cabinet doors, cupboard panels, side tables, drawer fronts, room dividers, headboard accents, and other light furniture repair or decor projects. It can also be used with rattan weaving supplies when you are planning matching repair or craft work.

For buyers comparing different roll sizes, this 5-foot option works well for smaller panels, while a longer 24″ width square rattan cane webbing roll 15 feet may be better for multiple cabinet doors or larger furniture projects.

Measuring and Cutting Guidance

Measure the frame opening before cutting the sheet. Add a small extra margin around the edges so the material can sit securely inside the groove or frame. Use sharp scissors or a utility knife for a cleaner cut, and trim slowly to avoid cutting too much material at once.

If you are repairing a chair or framed insert, compare the old panel size, groove depth, and weave pattern before replacing it. For seat or back repairs, some buyers may also need a pressed cane webbing kit depending on the chair design and installation method.

Soaking and Installation Notes

Before installation, soak the rattan cane webbing in warm water for about 15–30 minutes, or until it becomes more flexible. This helps reduce cracking while bending, fitting, or stretching the sheet into place. Do not oversoak it, and allow it to dry naturally after installation.

For cleaner results, install the webbing evenly and avoid pulling one side too tightly before the other side is positioned. If you are matching this sheet with other cane webbing roll sizes, check the weave type, width, length, and color tone before ordering.

Care and Maintenance

Wipe the finished surface with a dry or slightly damp cloth when needed. Avoid harsh cleaners, heavy soaking after installation, or placing natural rattan in very wet conditions for long periods. Keep the material away from strong direct sunlight when possible to reduce drying and brittleness.

Natural rattan can expand or contract slightly with moisture and temperature changes. For long-term use, handle the woven surface gently and avoid pressing sharp objects into the mesh.