Product Details
- Product: Rattan Cane Webbing Roll
- Listed size: 24 inch width x 67 inch length
- Size shown in product details: 2′ x 6′ (seller size label is approximate; confirm against the listed 24 inch width x 67 inch length before publishing)
- Material listed: rattan
- Fabric type listed: natural rattan
- Brand listed: Hi Key Trading
- Pattern listed: octagon
- Product dimensions listed: 66.93 x 23.62 x 0.04 inches
- Item weight listed: 14.4 ounces
- Product care instruction listed: open the rattan roll and soak it in warm water for 15-30 minutes, remove from water, pat dry, and avoid over-soaking before installation
- Best for: cabinet panels, chair backs, screens, table accents, furniture repair, woven inserts, and DIY caning projects
For a smaller sheet size, compare smaller 24 inch cane webbing sheet before choosing your roll.
Best Uses for 24 Inch Cane Webbing
This 24″ x 67″ cane webbing is best for projects that need a longer natural rattan sheet, such as cabinet doors, chair backs, furniture panels, room dividers, and decorative home updates. It can also be used for replacing worn cane panels on older furniture when the weave style and size match the project.
If you need a 5-foot roll instead, review 5-foot 24 inch cane webbing roll before ordering.
For projects where you prefer material sold by the running foot, compare 24 inch cane webbing sold by the running foot as another option.
How to Measure Before Cutting
Measure the project opening before cutting the webbing. Leave extra material around each side so the cane can be secured properly into a groove, frame, or panel area.
Use sharp scissors or a clean cutting tool for smoother edges. Natural rattan may vary slightly in color, thickness, and weave spacing, so inspect the sheet before cutting and place the best-looking section where it will be most visible.
How to Soak and Install Cane Webbing
Before installation, soak the rattan cane webbing in warm water for the listed 15-30 minutes so it becomes more flexible. Do not over-soak or leave the cane in water longer than the seller instructions. After soaking, remove extra water and pat it dry before fitting it into the project area.
Do not force dry cane webbing into tight grooves or corners, because it can crack or split. Let the finished project dry fully after installation so the cane can tighten and settle into place.
For cabinet or furniture panel planning, the cabinet door measuring guide can help with measuring, fitting, and installation steps.
Care and Maintenance
Clean finished cane webbing with a soft dry cloth or lightly damp cloth when needed. Avoid soaking installed cane for long periods, and do not use harsh cleaners on natural rattan.
Keep finished pieces away from long-term moisture, direct outdoor weather, and extreme heat unless the furniture finish is designed for that use.
Related Repair Option
If your project needs cane webbing with spline, wedges, and instructions, compare the pressed cane webbing kit before buying separate parts.
Before You Buy
Check the project opening, required webbing size, weave pattern, installation method, and whether you need glue, staples, spline, wedges, tools, or a frame before ordering. Treat this as cane webbing material only unless the seller confirms included accessories. Before publishing, confirm stock, exact size, package contents, return policy, and product details on your own product page.
